Chemikonics catalog: Voltera V-One and Nova PCB printers, conductive and UV inks, Blackleaf graphene materials, and VFP inks for plastic cards and secure documents. Full technical specifications for each product – please contact us for pricing and availability.
BLACKHEATER GPAD 20+
Flexible graphene-based heating foil for drones
The BLACKHEATER GPAD 20+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Originally designed for drone applications, the BLACKHEATER GPAD 20+ operates at 12V DC (20W) and provides uniform heat distribution with a total thickness of 295µm and a minimum bend radius of 2mm. To function correctly, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the heater's resistance.
Specification
Standard format500 × 50 mm
Supply voltage12 V DC
Nominal power20 W
Nominal current1,6 A at 12 V
Electrical resistance of the heater7,5 Ω
Total thickness295 um
Weight of one plate15 gr
Ambient operating temperature-40 ° C to + 120 ° C
Max. surface temperature (reference conditions, 20 W)approx. 95°C
Applications
De-icing and defrosting the leading edge of dronesThermal management of batteries and on-board electronicsThermal Signature Check (Thermal Decoy)OEM Integration and DIY Systems
Ask about the product →
BLACKHEATER GPAD 10+
Flexible graphene heating film for low-voltage applications
The BLACKHEATER GPAD 10+ is a thin and flexible graphene heating film printed on a PET substrate. Designed for low-voltage heating applications powered by a mobile power bank (5 V DC, 8 W, USB-C), it ensures uniform heat distribution with a total thickness of 400 µm and a minimum bend radius of 2 mm. For proper operation, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the heater's resistance.
Specification
Standard format150 × 100 mm
Supply voltage5V DC (USB-C)
Nominal power8 W
Nominal current1,8 A at 5 V
Electrical resistance of the heater2,8 Ω
Total thickness400 um
Weight of one plate16 gr
Ambient operating temperature-40 ° C to + 120 ° C
Max. surface temperature (reference conditions, 8 W)approx. 58°C
Applications
Integration with wearablesPersonal comfortHeating terrariums and reptilesHeating small animalsOEM Integration and DIY Systems
Ask about the product →
SILVER ELECTRON
Silver Conductive Paint for Printed Electronics
SILVER ELECTRON (SE) is a solvent-based silver-based conductive ink designed for printed electronics applications. It provides high electrical conductivity and high stability of conductive properties over time after annealing, as well as excellent flexibility. It is ideal for the production of printed conductive traces, sensors, membrane switches, RFID antennas, and flexible electronics. The product is compatible with PET, PVC, polycarbonate, surface-modified polyester, glass, polyimide, and paper/cardboard substrates and meets the requirements of the non-CMR policy.
Specification
resistance≤ 15 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C58–64
Yield (cm²/g)280–360
Open time on the sieve (min)60
Substrate
Paper cartonPVCPETPolycarbonateSurface-modified polyesterGlassPolyimide
Ask about the product →
BLACKHEATER GPAD 40+
Flexible, self-adhesive graphene-based heating foil for low-energy applications
The BLACKHEATER GPAD 40+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Designed for lightweight, uniform, low-power thermal management applications (48 V DC, 77 W), it provides uniform heat distribution with a total thickness of 370 µm and a minimum bend radius of 2 mm. Connection is via a quick-connect housing with two wires (positive and negative)—do not exceed the maximum supply voltage of 48 V DC. Temperature control requires an external probe and an ON/OFF thermostat or PID controller. Control cannot be based on measuring the resistance of the heating film.
Specification
Standard format330 × 330 mm
Supply voltage48 V DC
Nominal power77 W
Nominal current1,6 A at 48 V
Electrical resistance of the heating foil30 Ω
Total thickness370 um
Weight of one panel78 gr
Ambient operating temperature-40 ° C to + 100 ° C
Max. surface temperature (reference conditions, 77 W)approx. 60°C
Applications
Thermal management of batteries and on-board electronicsHeating of electrical and electronic cabinetsCondensation protectionLocal temperature maintenance (low voltage)
Ask about the product →
NEOBLACK SP1
Conductive graphene-based ink for screen printing
NEOBLACK SP1 is a water-based, conductive graphene-based screen printing ink designed to create thin, flexible, and uniform conductive patterns in heating applications and printed electronics. Solvent-free and single-component (ready-to-use), it features high flexibility, compatibility with a wide range of substrates, and easy cleanup after use with distilled water. The resistive behavior remains stable (STC) up to 150°C; above this temperature, the ink exhibits a negative temperature coefficient (NTC). Thermal curing: 120–150°C for 3–5 min (or tunnel oven in a 100→130→130°C profile, approximately 1,5 min total).
Specification
Resistivity (2 layers, 35 µm)20 Ω/sq (14 Ω/sq/mil)
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)15
Coverage (cm²/g)78,25
Resistive Stability (STC)to 150 ° C
Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI
Ask about the product →
Voltera V-One
4-in-1 PCB Printer for Rapid Electronics Prototyping
The Voltera V-One is a compact 4-in-1 PCB printer that combines conductive trace printing, hole drilling, solder paste dispensing, and reflow soldering in a single device. This allows a functional PCB prototype to be created in an hour instead of days or weeks. According to the manufacturer, the device allows for up to 15 prototypes per day—without the need for outsourcing. The print bed heats up to 240°C, enabling both curing conductive paint and reflow solder directly onto the board. The V-One is ideal for electronic prototype development and assembly, technical education, and makerspaces, ensuring full intellectual property protection thanks to in-house production. Chemikonics supplies the device along with consumables and technical support in the Polish market.
Specification
Minimum track widthTraces
Workspace (print)128 116 mm × mm × mm 3
XYZ resolution10 µm × 10 µm × 1 µm
Number of layersone-sided, two-sided
TechnologyDirect Ink Write (DIW)
Fixing the substrateclamping
Substrate thickness1--3mm
Maximum temperature of the heating table240°C
CNC spindle speed11,000 rpm (RPM)
Syringe capacityup to 2 ml
Dosed materialssoldering pastes, Conductor 3 conductive ink (silver)
File formatGerber
Included
The Voltera V-One printer comes with a drilling module. A full list of included components is below.
V-One Master Kit - 16 Items
V-One PCB Printer1 pieces.
V-One dispenser (dispenser)2 pieces.
V-One Probe1 pieces.
Nozzle set (internal diameter 230 µm)25 pieces.
FR1 3×4″ Substrate Kit6 pieces.
FR1 2×3″ Substrate Kit10 pieces.
Substrate clamps2 pieces.
Set of wing screws4 pieces.
Hello World set1 pc.
Conductive Ink Cartridge 2 ml1 pieces.
Solder Paste Cartridge 2 ml1 pieces.
Solder wire1 pieces.
tweezers1 pieces.
Power cable1 pieces.
USB cable1 pieces.
User manuals1 pieces.
V-One Drill Module - 10 Positions
V-One Drilling Module1 pieces.
PCB drill set1 pc.
Protective layer (sacrificial layer)1 pieces.
1,0mm rivet tool1 pieces.
0,4mm rivet tool1 pieces.
Copper rivets 1,0 mm ID200 pieces.
Copper rivets 0,4 mm ID200 pieces.
Punk Console Set1 pc.
Goggles1 pieces.
Power supply with adapter1 pieces.
Substrate
FR1FR4
Perfect for
R&D departmentsTechnical universitiesHardware startupsElectronics manufacturersMakerspaces
More about the product →
Ask about the product →
BLACKHEATER GPAD 30+
Flexible graphene-based heating foil for low-voltage applications
The BLACKHEATER GPAD 30+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Designed for lightweight, low-power thermal management applications (12 V DC, 4 W), it provides uniform heat distribution with a total thickness of 185 µm and a minimum bend radius of 2 mm. For proper operation, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on heater resistance measurement.
Specification
Standard format100 × 100 mm
Supply voltage12 V DC
Nominal power4 W
Nominal current0,33 A at 12 V
Electrical resistance of the heater36 Ω
Total thickness185 um
Weight of one plate2,13 gr
Ambient operating temperature-40 ° C to + 100 ° C
Max. surface temperature (reference conditions, 4 W)approx. 60°C
Applications
Thermal management of batteries and electronicsHeating of electrical and electronic cabinetsCondensation protectionLocal temperature maintenance (low voltage)
Ask about the product →
UVICARD TF
UV NON CMR ink for screen printing on PVC and RPVC cards
UVICARD TF is a non-carcinogenic and mutagenic UV screen printing ink designed for printing on PVC and RPVC cards. UV-curable, it dries quickly, and is compatible with offset printing for lamination and embossing. It has a glossy finish. Validation on the target substrate and within the applicable processing window is recommended before production implementation.
Specification
SubstratesPVC, RPVC
Net160 to 355 threads/inch (63 to 140 threads/cm)
EmulsionAll types of solvent and UV resistant emulsions
Squeegee75 shA
DryingUV curing
Thinner and additiveUV201 Thinner
Cleaning77 ORGANIC
Storage12 months at +5°C to +35°C
Substrate
PVCRPVC
See all color codes
Gold metallic
CC3001TF GOLD
CC3014TF GOLD
CC3600TF GOLD
CC3601TF YELLOW GOLD
CC3602TF GREEN GOLD
CC3603TF RED GOLD
Silver metallic
CC302TF MEDIUM SILVER
CC303TF LARGE SILVER
CC9009TF FINE SILVER
Pearl
CC311TF PEARL FINE
CC312TF PEARL MEDIUM
CC313TF PEARL LARGE
Primary colors
CC102TF WHITE
CC404TF ORANGE
CC406TF GOLDEN YELLOW
CC501TF LEMON YELLOW
CC612TF GREEN
CC701TF VIOLET
CC719TF BLUE
CC801TF RED
CC810TF CARMINE
CC811TF PINK
CC902TF BLACK
Transparent colors
CC5601TF TRANS YELLOW
CC7602TF TRANS BLUE
CC8003TF TRANS BROWN
CC8602TF TRANS RED
Opaque black
CC905TF OPAQUE BLACK
Varnishes
CC0003TF PEARL VARNISH
CC001TF CLEAR BASE
Thinners and additives
UV201 THINNER
Primers and adhesives
UVPLATF PRIMER*
CC0006TF PVC BACKING*
CC0007TF PVC/PVC GLUE*
CC0008TF PET FOUNDATION*
Voltera NOVA
Direct Ink Write (DIW) Platform for Printed Electronics and Functional Materials
Voltera NOVA is a modular Direct Ink Write (DIW) platform that enables precise dispensing of functional materials—solder pastes, conductive paints, dielectrics, and other functional materials—and rapid prototyping of printed electronics. The system works on rigid (PCBs, glass, ceramics), flexible (PI, PET), stretchable (TPU), and porous (paper, fabric) substrates, accelerating R&D by up to 90% and reducing material costs by up to 96% (according to the manufacturer). Chemikonics supplies the device along with consumables and technical support in the Polish market.
Specification
TechnologyDirect Ink Write (DIW)
Minimum track width0,1 mm *
Workspace (print)220 300 mm × mm × mm 40
Number of layersup to 4 layers (stack-up)
XYZ resolution2,5 µm × 7 µm × 1,25 µm
Pressure controlclosed loop
Material temperature controlto 40 ° C
Compatible modulesSmart Dispenser, Smart Probe, Vacuum Table
Fixing the substrateraised clamps, vacuum table, M5 mesh (40×40 mm)
Substrate thicknessup to 30 mm
Syringe capacityup to 2,5 ml
File formatGerber, SVG (beta)
Dosed materialssolder pastes, conductive paints, dielectrics and other functional materials
Material viscosity1,000–1,000,000 cP
Number of module slots2
interfaceweb application (browser)
CommunicationEthernet, USB-A, Wi-Fi (with adapter)
Substrate
PCB / glass / ceramicsFlexible films (PI, PET)Stretchable materials (TPU)Porous substrates (paper, fabrics)
Perfect for
R&D departmentsUniversity laboratoriesFlexible electronics manufacturersMaterials startups / deep-techResearch centers
Applications
Electrodes/sensors (ECG)Printed batteriesRFID / antennasIntelligent textilesEL circuits
More about the product →
Ask about the product →
BLACKHEATER GPAD 11+
Flexible graphene-based heating foil with a clamp connection
The BLACKHEATER GPAD 11+ is a thin and flexible graphene-based heating film printed on a PET substrate without an integrated adhesive layer. Designed for low-voltage heating applications (5 V DC, 8 W), it ensures uniform heat distribution with a total thickness of 400 µm and a minimum bend radius of 2 mm. Connection via terminal connectors requires a 5 V DC power supply with a minimum capacity of 1,8 A and an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the resistance of the heating film.
Specification
Standard format150 × 100 mm
Supply voltage5 V DC
Nominal power8 W
Nominal current1,8 A at 5 V
Electrical resistance of the heating foil2,8 Ω
Total thickness400 um
Weight of one panel16 gr
Ambient operating temperature-40 ° C to + 120 ° C
Max. surface temperature (reference conditions, 8 W)approx. 58°C
Applications
Integration with wearablesPersonal comfortHeating terrariums and reptilesHeating small animalsOEM Integration and DIY Systems
Ask about the product →
NEOBLACK SC1B
Conductive graphene-based spray paint
NEOBLACK SC1B is a water-based, conductive, graphene-based spray paint designed for heating and EMI shielding applications. Solvent-free and single-component (ready-to-use), it's based on multilayer graphene (FLG), compatible with a wide range of substrates, and easy to clean after use. Thermal cure: 120–150°C for 3–5 minutes (or 4–5 minutes with an IR lamp).
Specification
Resistivity (normalized)35 Ω/sq/mil
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)0,135
Solids content (%)4,6
Durability12 months
Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI
Ask about the product →
Low Viscosity – SILVER ELECTRON LOW ENERGY CURING
Low viscosity silver conductive paint for printed electronics
LOW VISCOSITY – SILVER ELECTRON LOW ENERGY CURING is a low-viscosity conductive silver ink designed for screen printing in printed electronics applications. Its optimized rheology enables the printing of thin, precise conductive traces while maintaining high electrical conductivity. Low-temperature curing makes it ideal for temperature-sensitive substrates such as PET films, paper, and cardboard. This product complies with non-CMR regulations and is ideal for the production of membrane switches, RFID tags, touch panels, and flexible printed electronics.
Specification
resistance≤ 12 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C15–25
Yield (cm²/g)260–340
Open time on the sieve (min)30
Substrate
Paper cartonPETPVCPolycarbonateSurface-modified polyester
Ask about the product →
PIEZO ELECTRON UV
Piezoelectric Paint for Printed Electronics
PIEZO ELECTRON UV (PEUV) is a piezoelectric UV ink designed for printed electronics. UV curing enables the rapid production of active functional layers. Requiring a low bias voltage (20 V/µm), it can be used in thermally sensitive components, simplifying the manufacturing process. The ink is suitable for pressure and vibration sensors, haptic elements, energy harvesting systems, and other printed electronics applications. The formulation is PFAS-free and complies with non-CMR requirements.
Specification
Piezoelectric coefficient2 pC/N. The material is an electrical insulator.
Viscosity (poise), Rotothinner, 562 rpm, 25°C170 10 ±
Yield (cm²/g)300–360
Open time on the sieve (min)60
Substrate
PETSurface-modified polyester
Ask about the product →
PIEZO ELECTRON SOLVENT
Piezoelectric Paint for Printed Electronics
PIEZO ELECTRON SOLVENT (PESOL) is a solvent-based piezoelectric ink designed for printed electronics applications. It enables the creation of active layers that respond to pressure, strain, and vibration by generating an electrical signal. The product is used in piezoelectric sensors, haptic elements, energy harvesting systems, structural monitoring, and flexible electronics. The non-CMR formulation ensures safer use and high compatibility with screen printing processes.
Specification
Piezoelectric coefficient8 pC/N. The material is an electrical insulator.
Viscosity (poise), Rotothinner, 562 rpm, 25°C88 5 ±
Yield (cm²/g)250–300
Open time on the sieve (min)60
Substrate
PETSurface-modified polyester
Ask about the product →
SILVER ELECTRON STRETCHABLE
Silver Paint for Printed Electronics
SILVER ELECTRON STRETCHABLE (SES) is a solvent-based, silver-based conductive ink designed for applications requiring high flexibility and stretchability. The product was developed for wearable electronics, intelligent textiles, and thermoformed components (IME/IMD). After appropriate curing, the ink provides high electrical conductivity, heat resistance, excellent substrate adhesion, and high print resolution. It can be used on PET, polycarbonate, and polyurethane substrates and is compatible with thermoforming processes. The formulation is CMR-free (non-CMR).
Specification
resistance< 15 mΩ/sq/mil (3,8×10⁻⁷ Ω m)
Viscosity (poise), Rotothinner, 562 rpm, 25°C25
Yield (cm²/g)290–370
Open time on the sieve (min)> 60
Substrate
Paper cartonPVCPolyurethanePETPolycarbonateSurface-modified polyesterPolyimide
Ask about the product →
AQUACARD TF
Hydro UV NON CMR ink for printing on PVC cards
AQUACARD TF is a technical VFP ink and varnish designed for the production of bank cards (PVC, RPVC). Its appearance is similar to solvent ink, but without VOC restrictions – it supports industrial printing processes, accepts embossing, laminating, and offset overprinting. It is dried by water evaporation on IR bridges and then polymerized with UV radiation. Validation on the target substrate, within the applicable process window and regulatory context, is recommended before production implementation – the ink is NON-CMR, where applicable.
Specification
Ink typeHydro UV NON CMR
ApplicationBank cards (PVC, RPVC)
Efficiency30–40 m²/kg
SqueegeePolyurethane A65/A75
DryingIR + UV 100–120 mJ/cm²
Lamination125–140°C, 5–15 min
Adhesion>8 N/cm (peel)
Durability12 months
Substrate
PVCRPVC
See all color codes
Golden
AC3004TF GOLD
AC3005TF GOLD
AC3006TF GOLD
AC3007TF GREEN GOLD
AC3008TF GOLD
AC3009TF RED GOLD
AC3010TF GOLD
AC3012TF GOLD
AC3013TF GOLD
Silver
AC301TF FINE SILVER
AC302TF MEDIUM SILVER
AC303TF LARGE SILVER
AC304TF MEDIUM SILVER
AC9003TF SILVER
AC9004TF SILVER
Pearl
AC311TF FINE PEARL
AC312TF PEARL
AC1002TF PEARL
AC1003TF PEARL
AC1012TF PEARL
AC1013TF PEARL
AC9011TF PEARL
Lacquer
AC003TF VARNISH
ECV003
Dielectric Varnish for Printed Electronics
ECV003 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.
Specification
Breakdown voltage≥ 4000 V (2 layers)
Curing energy (mJ/cm²)> 300
Density1,13
Viscosity (poise), Rotothinner, 562 rpm, 25°C95
Paint colorGreen
Chemical compatibility with the seriesSilver Electron
Yield (cm²/g)400–440
Open time on the sieve (min)60
Substrate
Paper cartonPETPolycarbonateSurface-modified polyester
Ask about the product →
VINYGLOSS V2
Solvent-based, non-CMR ink for printing on PVC, polyester, polycarbonate, acrylic plastics, paper and cardboard
VINYGLOSS V2 is a non-CMR solvent-based ink designed for printing on self-adhesive and rigid PVC, treated polyester, polycarbonate, acrylics, specialty papers, and cardboard. It can be used on manual, semi-automatic, 3/4-automatic, and automatic machines. It performs exceptionally well on PVC and is stackable immediately after exiting the tunnel. It is characterized by high opacity, self-dilution, good light resistance, and thermoformability. Note: These substrates may vary depending on source, so preliminary testing is necessary.
Specification
Ink typeSolvent-based, non-CMR
ApplicationSelf-adhesive and rigid PVC, treated polyester, polycarbonate, acrylic plastics, special papers, cardboard
Sito200–300 threads/inch (79–120 threads/cm)
EmulsionAll types are solvent resistant
SqueegeePolyurethane 65 shA or 75 shA
DryingSolvent evaporation; approx. 5–20 min at room temperature; blowing at 60°C for 10–20 s
ThinnersV2 201 (15–20%), retarder V2 203 for drying on a screen
Cleaning the sieveBiosolvent 77 BIO
Storage5 years, +5°C to +35°C, in original packaging
Substrate
Self-adhesive PVCRigid PVCTreated polyesterPolycarbonateAcrylic materialsSpecial papersCardboard boxes
See all color and material codes
Primary colors
V2102 WHITE
V2404 ORANGE
V2406 GOLDEN YELLOW
V2501 LEMON YELLOW
V2612 GREEN
V2701 PURPLE
V2719 PERMANENT BLUE
V2801 RED
V2810 CARMINE
V2811 PINK
V2902 BLACK
Mixtone Colors
V210MX WHITE
V251MX MIXTONE GOLDEN YELLOW
V240MX MIXTONE ORANGE
V281MX MIXTONE RED
V282MX MIXTONE PINK
V271MX MIXTONE PURPLE
V270MX MIXTONE BLUE
V260MX MIXTONE GREEN
V280MX MIXTONE VERMILLON
V290MX MIXTONE BLACK
Standard colors
V2433 SUPER ORANGE
V2526 MEDIUM YELLOW
V2531 YELLOW
V2638 BRILLIANT
V2722 BRILLIANT
V2727 BLUE
V2743 FRENCH BLUE
V2828 RED FIRE
V2830 LIGHT RED
Process colors
V2002 BASE TIX
V2560 YELLOW TIX RE
V2750 CYAN TIX
V2860 MAGENTA TIX R
V2950 BLACK TIX R
Highly lightfast colors
V2404LF ORANGE
V2406LF GOLDEN
V2501LF YELLOW
V2801LF RED
Transparent colors
V25600 TRANSPARENT
V26600 TRANS. GREEN
V27601 TRANS. BLUE
V28600 TRANS. RED
Opacity black / white
V2905 BLACK COVERAGE
V2103 WHITE COVERAGE
V2105 WHITE FOR WRITING
Lacquer
V2003 PRINTABLE VARNISH
Thinners and additives
V2201 THINNER
V2203 RETARDANT
CARBON ELECTRON-001
Resistive Carbon Paint for Printed Electronics
CARBON ELECTRON 001 (CEL001) is a solvent-based carbon ink designed for printed electronics applications. The product provides good electrical conductivity, high-quality screen printing, and uniform coverage even on large surfaces. It is compatible with PET and paper substrates, and its non-CMR formulation provides a safer solution for modern production processes. The ink is used on printed resistors, carbon traces, sensor electrodes, and membrane keypad contacts.
Specification
resistance≤ 120 Ω/sq/mil at 120°C (248°F)
Viscosity (poise), Rotothinner, 562 rpm, 25°C85–105
Yield (cm²/g)360–400
Open time on the sieve (min)> 30
Substrate
Paper/cardboardPETSurface-modified polyester
Ask about the product →
FLEXOGRAPHY SILVER ELECTRON
Silver Conductive Paint for Printed Electronics
FLEXOGRAPHY SILVER ELECTRON (FSE) is a solvent-based, silver-based conductive ink specifically designed for flexographic printing in printed electronics applications. It provides high electrical conductivity, stable parameters after curing, and high flexibility of printed traces. The product is intended for high-volume production of applications such as RFID tags, antennas, flexible printed circuits, and other functional electronics components. The ink is compatible with paper, PET, polycarbonate, and polyester substrates and meets the requirements of the non-CMR policy.
Specification
resistance≤ 10 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C12–18
Yield (cm²/g)300–380
Open time on the sieve (min)60
Substrate
Paper cartonPVCPETPolycarbonateSurface-modified polyesterGlassPolyimide
Ask about the product →