BLACKHEATER GPAD 10+
Graphene-based low voltage flexible heater
The BLACKHEATER GPAD 10+ is a thin and flexible graphene heating film printed on a PET substrate. Designed for low-voltage heating applications powered by a mobile power bank (5 V DC, 8 W, USB-C), it ensures uniform heat distribution with a total thickness of 400 µm and a minimum bend radius of 2 mm. For proper operation, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the heater's resistance.
Similar products
NEOBLACK SC2B
Conductive graphene-based spray paint
NEOBLACK SC2B is a water-based, conductive, graphene-based spray paint designed for heating and EMI shielding applications. Solvent-free and single-component (ready-to-use), it's based on multilayer graphene (FLG), compatible with a wide range of substrates, and easy to clean after use. Thermal cure: 120–150°C for 3–5 minutes (or 4–5 minutes with an IR lamp).
BLACKHEATER GPAD 40+
Flexible, self-adhesive graphene-based heating foil for low-energy applications
The BLACKHEATER GPAD 40+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Designed for lightweight, uniform, low-power thermal management applications (48 V DC, 77 W), it provides uniform heat distribution with a total thickness of 370 µm and a minimum bend radius of 2 mm. Connection is via a quick-connect housing with two wires (positive and negative)—do not exceed the maximum supply voltage of 48 V DC. Temperature control requires an external probe and an ON/OFF thermostat or PID controller. Control cannot be based on measuring the resistance of the heating film.
NEOBLACK SP2
Conductive graphene-based ink for screen printing
NEOBLACK SP2 is a water-based, conductive, graphene-based screen printing ink designed to create highly conductive, flexible, and uniform patterns for heating, printed electronics, sensor technology, and EMI shielding applications. Solvent-free and single-component (ready-to-use), it features high flexibility, compatibility with a wide range of substrates, and easy cleanup with distilled water after use. The resistive behavior remains stable (STC) up to 150°C; above this temperature, the ink exhibits a negative temperature coefficient (NTC). Thermal curing: 120–150°C for 3–5 min (or tunnel oven in a 100→130→130°C profile, approximately 1,5 min total).
BLACKHEATER GPAD 30+
Flexible graphene-based heating foil for low-voltage applications
The BLACKHEATER GPAD 30+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Designed for lightweight, low-power thermal management applications (12 V DC, 4 W), it provides uniform heat distribution with a total thickness of 185 µm and a minimum bend radius of 2 mm. For proper operation, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on heater resistance measurement.
NEOBLACK SC1B
Conductive graphene-based spray paint
NEOBLACK SC1B is a water-based, conductive, graphene-based spray paint designed for heating and EMI shielding applications. Solvent-free and single-component (ready-to-use), it's based on multilayer graphene (FLG), compatible with a wide range of substrates, and easy to clean after use. Thermal cure: 120–150°C for 3–5 minutes (or 4–5 minutes with an IR lamp).
BLACKHEATER GPAD 11+
Flexible graphene-based heating foil with a clamp connection
The BLACKHEATER GPAD 11+ is a thin and flexible graphene-based heating film printed on a PET substrate without an integrated adhesive layer. Designed for low-voltage heating applications (5 V DC, 8 W), it ensures uniform heat distribution with a total thickness of 400 µm and a minimum bend radius of 2 mm. Connection via terminal connectors requires a 5 V DC power supply with a minimum capacity of 1,8 A and an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the resistance of the heating film.
BLACKHEATER GPAD 20+
Flexible graphene-based heating foil for drones
The BLACKHEATER GPAD 20+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Originally designed for drone applications, the BLACKHEATER GPAD 20+ operates at 12V DC (20W) and provides uniform heat distribution with a total thickness of 295µm and a minimum bend radius of 2mm. To function correctly, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the heater's resistance.
NEOBLACK SP1
Conductive graphene-based ink for screen printing
NEOBLACK SP1 is a water-based, conductive graphene-based screen printing ink designed to create thin, flexible, and uniform conductive patterns in heating applications and printed electronics. Solvent-free and single-component (ready-to-use), it features high flexibility, compatibility with a wide range of substrates, and easy cleanup after use with distilled water. The resistive behavior remains stable (STC) up to 150°C; above this temperature, the ink exhibits a negative temperature coefficient (NTC). Thermal curing: 120–150°C for 3–5 min (or tunnel oven in a 100→130→130°C profile, approximately 1,5 min total).