TGLASS
Solvent-based, two-component, non-CMR ink for printing on glass, non-ferrous metals and ceramics
TGLASS is a solvent-based, two-component, non-CMR ink designed for printing on glass, non-ferrous metals, aluminum, and ceramics. It can be used on manual, semi-automatic, three-quarter automatic, and automatic machines. It is characterized by very high gloss, enabling marking and decorating difficult-to-print substrates, quick drying, and high chemical and water wash resistance. The ink/hardener mixture can be used for up to 48 hours (in closed containers), and the ink film has good elasticity.
See all color and material codes
Similar products
SILVER ELECTRON LOW ENERGY CURING
Silver Conductive Paint for Printed Electronics
SILVER ELECTRON LOW ENERGY CURING (SELEC) is a solvent-based, silver-based conductive ink for printed electronics. Designed for processes requiring reduced temperatures and faster curing times, it performs well on thermally sensitive substrates such as PET, paper, foils, and TCA. The ink provides high electrical conductivity, good printability, and uniform surface coverage while maintaining non-CMR compliance.
ECV004
Dielectric Varnish for Printed Electronics
ECV004 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.
39000NF V2
UV screen printing ink, non-CMR, for printing on paper, cardboard and various plastics
39000NF V2 is a versatile, non-CMR UV ink designed for printing on paper or board, flexible or rigid PVC, self-adhesive PVC, single-layer polycarbonate, and treated polyester. It features very fast drying for precise registration on sensitive substrates, good chemical resistance, and high lightfastness. Available in a wide range of basic colors, quadri references, and as a non-yellowing and textured varnish, it can be used on all types of screen printing machines: manual, semi-automatic, 3/4-automatic, and automatic.
See all color and material codes
CARBON ELECTRON-001
Resistive Carbon Paint for Printed Electronics
CARBON ELECTRON 001 (CEL001) is a solvent-based carbon ink designed for printed electronics applications. The product provides good electrical conductivity, high-quality screen printing, and uniform coverage even on large surfaces. It is compatible with PET and paper substrates, and its non-CMR formulation provides a safer solution for modern production processes. The ink is used on printed resistors, carbon traces, sensor electrodes, and membrane keypad contacts.
UVILABEL V2
UV ink (non-CMR) for top-coated paper, PE and PP labels
UVILABEL V2 is a non-CMR UV screen printing ink designed for label printing on flatbed roll-to-roll screen printing machines. The ink is flexible, warp-resistant, dries very quickly, and offers exceptional screen stability, making it suitable for hot foil stamping. It produces a glossy finish on non-absorbent substrates. Substrates may vary depending on source; preliminary testing is recommended before production.
See packaging and thinners
IR BLOCKING V2
NON CMR infrared blocking solvent ink for transparent cards
IR BLOCKING V2 is a non-CMR solvent ink printed inside the card structure, absorbing infrared light (860–950 nm). It enables the correct reading and use of transparent payment cards in ATMs and ATM terminals, in accordance with the ISO/IEC 7810 standard. This non-flammable product, not classified as hazardous for transport, dries quickly, and is available in glossy or satin finishes.
PLUTO V2
UV screen printing ink, non-CMR, for printing on many substrates (PE, PP, PVC, self-adhesive vinyl)
PLUTON V2 is a single-component, non-CMR, ready-to-use UV ink designed for printing on treated polyethylene and polypropylene (sheet or corrugated, surface tension above 41 dyne/cm), rigid and flexible PVC, and self-adhesive vinyl. It also works well on paper, cardboard, ABS, polycarbonate, polyester, PMMA, and PETG. The ink has a glossy finish and can be used on semi-automatic, semi-automatic, and automatic presses.
See all color and material codes
ECV003
Dielectric Varnish for Printed Electronics
ECV003 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.