ECV004
Dielectric Varnish for Printed Electronics
ECV004 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.
Similar products
Low Viscosity – SILVER ELECTRON LOW ENERGY CURING
Low viscosity silver conductive paint for printed electronics
LOW VISCOSITY – SILVER ELECTRON LOW ENERGY CURING is a low-viscosity conductive silver ink designed for screen printing in printed electronics applications. Its optimized rheology enables the printing of thin, precise conductive traces while maintaining high electrical conductivity. Low-temperature curing makes it ideal for temperature-sensitive substrates such as PET films, paper, and cardboard. This product complies with non-CMR regulations and is ideal for the production of membrane switches, RFID tags, touch panels, and flexible printed electronics.
SOLVCARD
NON-CMR solvent ink for printing on PVC, RPVC and PET cards
SOLVCARD is a non-CMR solvent ink designed for printing on PVC, RPVC, and PET cards. It provides good stability for metallic inks in the packaging and on screens, is non-flammable, and is not classified as hazardous for transport. It is compatible with offset printing and UVICARD TF inks, and is suitable for laminating and embossing. Available in gloss or satin finishes.
See all color and material codes
UVICARD TF
UV NON CMR ink for screen printing on PVC and RPVC cards
UVICARD TF is a non-carcinogenic and mutagenic UV screen printing ink designed for printing on PVC and RPVC cards. UV-curable, it dries quickly, and is compatible with offset printing for lamination and embossing. It has a glossy finish. Validation on the target substrate and within the applicable processing window is recommended before production implementation.
See all color codes
UVTHF
UV varnish (non-CMR) compatible with standard gilding foils
UVTHF is a non-CMR UV screen printing varnish designed for hot stamping transfer foils on flatbed roll-to-roll screen printing machines. It eliminates the need for a jig—the pattern is defined directly by the screen, ensuring high-resolution detail. Compatible with standard hot stamping foils; the final appearance depends on the foil used. Substrates may vary depending on source—preliminary testing is recommended before production.
See packaging and thinners
AQUACARD TF
Hydro UV NON CMR ink for printing on PVC cards
AQUACARD TF is a technical VFP ink and varnish designed for the production of bank cards (PVC, RPVC). Its appearance is similar to solvent ink, but without VOC restrictions – it supports industrial printing processes, accepts embossing, laminating, and offset overprinting. It is dried by water evaporation on IR bridges and then polymerized with UV radiation. Validation on the target substrate, within the applicable process window and regulatory context, is recommended before production implementation – the ink is NON-CMR, where applicable.
See all color codes
UVRELCOL V2
UV varnish with a raised effect for dyeing (non-CMR)
UVRELCOL V2 is a high-viscosity, non-commercial UV screen printing varnish designed for printing raised-effect colored varnishes on flatbed, roll-to-roll, continuous label printing machines. It enables printing raised and colored effects in a single pass, ensuring high flexibility and good reactivity. It has a glossy finish. Substrates may vary depending on source – preliminary testing is recommended before production.
See packaging and thinners
NYLOTHANE
Solvent-based, non-CMR ink for printing on polyamide, polyester, polyurethane and technical foams
NYLOTHANE is a non-CMR solvent-based ink designed for printing on polyamide, polyester (fabric or injection molded), polyurethane, and technical foams, as well as for the production of water-based stickers. It can be used on semi-automatic, semi-automatic, and automatic machines. It is characterized by high speed on automatic machines, high gloss, good coverage, resistance to hydrocarbons, and good screen stability without the effects of static electricity. Note: The substrates listed may vary depending on the source, so preliminary testing is necessary.
See all color and material codes
SILVER ELECTRON STRETCHABLE
Silver Paint for Printed Electronics
SILVER ELECTRON STRETCHABLE (SES) is a solvent-based, silver-based conductive ink designed for applications requiring high flexibility and stretchability. The product was developed for wearable electronics, intelligent textiles, and thermoformed components (IME/IMD). After appropriate curing, the ink provides high electrical conductivity, heat resistance, excellent substrate adhesion, and high print resolution. It can be used on PET, polycarbonate, and polyurethane substrates and is compatible with thermoforming processes. The formulation is CMR-free (non-CMR).