



Voltera V-One Classroom Bundle
Educational kit of teaching materials and projects for the Voltera V-One printer for classrooms and laboratories
The Educational Classroom Bundle is a comprehensive set of consumables and ready-made teaching projects for the Voltera V-One printer, designed for instructors and lab supervisors introducing the V-One into their classroom curriculum. It includes over 150 FR1 substrates, 100 disposable nozzles, and 30 tutorial kits with step-by-step instructions, taking students from printing basics to fully assembled, working circuits. Practical accessories such as reference rulers and antistatic tweezers are also included.
Kit contents
Conductive inkConductor 4 – silver nanoparticle paint, 3 cartridges
Solder pasteT4 Sn42Bi57.6Ag0.4, 3 inserts
Dosing nozzles230 µm, disposable, 4 boxes (25 pcs/box)
FR1 foundations2″×3″, 10 packs (10 pcs/pack)
FR1 foundations3″×4″, 5 packs (6 pcs/pack)
FR1 foundations4″×5″, 5 packs (6 pcs/pack)
The "Hello World" Projectcomponent set, 15 sets
"99 Decimal Counter" projectcomponent set, 10 sets
Pulse Generator Projectcomponent set, 10 sets
Project "Voltage Regulator"component set, 10 sets
Floor clampsV-One Substrate Clamps, 1 Pack (2 pcs/pack)
Wing screwsM3×10, 2 packs (4 pcs/pack)
Antistatic tweezers3 pieces.
Reference rulers5 pieces.
compatibilityVoltera V-One printer
Category: Voltera
Description
Similar products
Copper rivets 1,0 mm 200 pcs.
1,0mm copper rivets for creating vias connecting the top and bottom layers of a Voltera V-One printed circuit board
Rivets are small copper bushings used to create vias on PCBs. Vias create a mechanical connection between the top and bottom layers of a printed circuit board (PCB) printed on a V-One printer. Rivet installation requires a 1,00 mm riveting tool matched to the rivet size.
Product data
compatibilityVoltera V-One printer
Contents of the package200 copper rivets
Inner diameterTraces
Production countryGermany
Head diameterTraces
Recommended drill size1,50mm or 1,60mm
Riveting tool sizeTraces
150 µm nozzles – 4 pcs.
150 µm Metal Dispensing Nozzles – 4 pcs in a set, for precision V-One and NOVA projects
150µm nozzles are high-precision metal dispensing tips that allow you to utilize the maximum resolution of your V-One and NOVA printers in your experimental projects. This kit includes four 150µm (6 mil) inner diameter nozzles, manufactured in the USA by Subrex. Do not use with T4 solder paste – this will cause nozzle clogging and reduced print quality.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationprecise designs requiring maximum print resolution
Kit contents4 metal nozzles with an internal diameter of 150 µm (6 mil)
Attentiondo not use with T4 solder paste - risk of nozzle clogging
Voltera V-One
4-in-1 PCB Printer for Rapid Electronics Prototyping
The Voltera V-One is a compact 4-in-1 PCB printer that combines conductive trace printing, hole drilling, solder paste dispensing, and reflow soldering in a single device. This allows a functional PCB prototype to be created in an hour instead of days or weeks. According to the manufacturer, the device allows for up to 15 prototypes per day—without the need for outsourcing. The print bed heats up to 240°C, enabling both curing conductive paint and reflow solder directly onto the board. The V-One is ideal for electronic prototype development and assembly, technical education, and makerspaces, ensuring full intellectual property protection thanks to in-house production. Chemikonics supplies the device along with consumables and technical support in the Polish market.
Specification
Minimum track widthTraces
Workspace (print)128 116 mm × mm × mm 3
XYZ resolution10 µm × 10 µm × 1 µm
Number of layersone-sided, two-sided
TechnologyDirect Ink Write (DIW)
Fixing the substrateclamping
Substrate thickness1--3mm
Maximum temperature of the heating table240°C
CNC spindle speed11,000 rpm (RPM)
Syringe capacityup to 2 ml
Dosed materialssoldering pastes, Conductor 3 conductive ink (silver)
File formatGerber
Included
The Voltera V-One printer comes with a drilling module. A full list of included components is below.
V-One Master Kit - 16 Items
V-One PCB Printer1 pieces.
V-One dispenser (dispenser)2 pieces.
V-One Probe1 pieces.
Nozzle set (internal diameter 230 µm)25 pieces.
FR1 3×4″ Substrate Kit6 pieces.
FR1 2×3″ Substrate Kit10 pieces.
Substrate clamps2 pieces.
Set of wing screws4 pieces.
Hello World set1 pc.
Conductive Ink Cartridge 2 ml1 pieces.
Solder Paste Cartridge 2 ml1 pieces.
Solder wire1 pieces.
tweezers1 pieces.
Power cable1 pieces.
USB cable1 pieces.
User manuals1 pieces.
V-One Drill Module - 10 Positions
V-One Drilling Module1 pieces.
PCB drill set1 pc.
Protective layer (sacrificial layer)1 pieces.
1,0mm rivet tool1 pieces.
0,4mm rivet tool1 pieces.
Copper rivets 1,0 mm ID200 pieces.
Copper rivets 0,4 mm ID200 pieces.
Punk Console Set1 pc.
Goggles1 pieces.
Power supply with adapter1 pieces.
Substrate
FR1FR4
Perfect for
R&D departmentsTechnical universitiesHardware startupsElectronics manufacturersMakerspaces
More about the product →
Ask about the product →Conductor 3
Third generation conductive ink for Voltera V-One and NOVA printers – higher conductivity, flexibility and durable hand soldering
Conductor 3 is Voltera's third-generation silver conductive ink, designed for printing conductive traces and pads on PCBs using the V-One and NOVA printers. Compared to Conductor 2, it offers higher conductivity, greater flexibility, and more durable hand soldering. Compatible with typical PCB substrates (FR1 and FR4 epoxy laminates), as well as glass, PET film, and polyimide (Kapton). 2 mL cartridge, made in the USA – requires refrigerated storage (4-10°C), shelf life up to 12 months from the date of production.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationprinting of conductive PCB paths and pads (dosing and curing on the V-One heating module)
Package2 ml cartridge
Production countryUSA
Resistivity4,35 × 10⁻⁶ Ω cm (sheet resistance 2,4 mΩ/sq at 15 µm)
Hardening15 minutes at 170°C (on V-One: automatic firing cycle)
SolderingSnBiAg1 / SnBiAg0,4 / Sn62Pb36Ag2 alloys with SMD291 flux, 180°C
SubstratesFR4/FR1 epoxy laminates (raw or with soldermask), uncoated glass, PET, polyimide (Kapton)
Recommended nozzle150-250 µm
Storage4-10°C, in a closed container, shelf life up to 12 months
Cleaningisopropyl alcohol (99%)
V-One dispenser
Replacement dispenser and cover for the Voltera V-One printer – precise dispensing of paint and solder paste
The V-One interchangeable dispenser and sheath are used to dispense conductive paint or solder paste onto the board. The cartridge slides into the sheath chamber, the dispenser locks into place, and the entire assembly magnetically attaches to the V-One printhead, ensuring stable and precise material dispensing during printing.
Product data
compatibilityVoltera V-One printer
Applicationdosing conductive paint and solder paste
Mountingmagnetic, on the V-One print head
T4 Sn42Bi57.6Ag0.4 solder paste
Lead-free tin-bismuth-silver solder paste for Voltera V-One printer – lower melting temperature, ideal for silver printed paths
T4 Solder Paste is a lead-free, RoHS-compliant tin-bismuth-silver (Sn42Bi57,6Ag0,4) alloy paste designed for soldering SMD components on V-One printed PCBs, as well as on factory-printed PCBs. The addition of bismuth lowers the remelting temperature compared to other alloys, making T4 paste ideal for working with V-One printed silver traces.
Product data
compatibilityVoltera V-One printer
ApplicationSMD soldering on PCBs (printed on V-One and factory-made)
Package2 ml cartridge
Production countryUSA
Alloy compositionSn42Bi57,6Ag0,4 (tin-bismuth-silver), lead-free, RoHS compliant
Particle sizetype T4
Efficiencyapprox. 11,000 pads per cartridge (0603 pads)
Durabilityapprox. 12 months at room temperature
Storagelong-term in a cool, dark place
Recommended nozzlesVoltera disposable nozzles; for greater precision, Subrex 225 µm nozzles
V-One Drilling Module
Attachment for drilling throughs and holes in double-sided boards – automatic and quiet operation
The V-One drilling module allows you to create vias and clearance holes in double-sided boards, which are then riveted together. The attachment attaches to the V-One head like a probe or dispenser, but is externally powered – the entire operation is automatic and surprisingly quiet.
Product data
compatibilityVoltera V-One printer
Applicationdrilling vias and transition holes in double-sided boards
Powerexternal, 12V power supply (6 ft cable)
IncludedPCB drills, 0,4/1,0 mm rivets, riveting tools, FR1 substrates, safety glasses, Punk Console kit
Conductor 4
4th generation conductive ink for Voltera V-One printer – high silver content, excellent solderability and short curing time
Conductor 4 is Voltera's latest, fourth-generation silver conductive ink. It contains 80% silver by weight (nanoparticles approximately 80 nm) and is designed for printing conductive traces and pads on PCBs (FR1, FR4 laminates) using the V-One printer. It provides excellent water and alcohol resistance and very good solderability – it accepts soldering with tin-bismuth-silver wire with flux at 180°C. Thermal cure: 10 minutes at 175°C. 2 mL cartridge, made in the USA – requires refrigerated storage, shelf life up to 12 months from the date of production.
Product data
compatibilityVoltera V-One printer
Silver content80% by weight (silver nanoparticles approx. 80 nm)
Applicationprinting of conductive PCB paths and pads (FR1, FR4 laminates)
Package2 ml cartridge
Hardening175°C for 10 minutes
Solderingtin-bismuth-silver (Sn-Bi-Ag) soldering wire with flux, temperature 180°C
Resistancevery good resistance to water and alcohol
Storagein cold storage, shelf life up to 12 months from the date of production
Production countryUSA
