



V-One Drilling Module
Attachment for drilling throughs and holes in double-sided boards – automatic and quiet operation
The V-One drilling module allows you to create vias and clearance holes in double-sided boards, which are then riveted together. The attachment attaches to the V-One head like a probe or dispenser, but is externally powered – the entire operation is automatic and surprisingly quiet.
Product data
compatibilityVoltera V-One printer
Applicationdrilling vias and transition holes in double-sided boards
Powerexternal, 12V power supply (6 ft cable)
Included in the setPCB drills, 0,4/1,0 mm rivets, riveting tools, FR1 substrates, safety glasses, Punk Console kit
Category: Voltera
Description
Similar products
V-One Probe
Sensor for scanning the board topography before printing – 20 micron precision
The V-One probe is a precision proximity sensor that scans the board surface before printing and creates a topographic map with 20-micron accuracy. This allows the print head to dispense conductive ink and solder paste at the correct height, even on uneven or curved substrates.
Product data
compatibilityVoltera V-One printer
Applicationscanning the board topography before printing (surface mapping)
Scanning precision20 microns
Tip protectionIt is recommended to protect the tip of the probe from damage
Disposable nozzles 230 µm – 25 pcs.
Disposable dispensing nozzles 230 µm – 25 pcs in a set, for V-One and NOVA
230µm disposable nozzles are plastic dispensing tips that minimize ink consumption and maximize flow, making refilling easier. They don't offer the same print resolution as metal nozzles, but they're a good option if metal nozzles frequently break or clog. The kit includes 25 clear, disposable polypropylene nozzles.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationeasy to fill dispenser, an alternative when metal nozzles become clogged or broken
Kit contents25 clear disposable polypropylene nozzles
Dimensionsouter diameter 0,42 mm (0,016 in), inner diameter 0,23 mm (0,009 in)
100 µm nozzles – 4 pcs.
Metal dispensing nozzles 100 µm – 4 pcs in a set, for very low viscosity materials
100µm nozzles are high-precision metal dispensing tips designed for dispensing very low-viscosity materials. The kit includes four 100µm (4 mil) internal diameter nozzles, manufactured in the USA by Subrex. Do not use with Cond3 ink or T5 solder paste – this will cause nozzle clogging and reduced print quality.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationdosing of very low viscosity materials
Kit contents4 metal nozzles with an internal diameter of 100 µm (4 mil)
Attentiondo not use with Cond3 ink or T5 solder paste - risk of nozzle clogging
150 µm nozzles – 4 pcs.
150 µm Metal Dispensing Nozzles – 4 pcs in a set, for precision V-One and NOVA projects
150µm nozzles are high-precision metal dispensing tips that allow you to utilize the maximum resolution of your V-One and NOVA printers in your experimental projects. This kit includes four 150µm (6 mil) inner diameter nozzles, manufactured in the USA by Subrex. Do not use with T4 solder paste – this will cause nozzle clogging and reduced print quality.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationprecise designs requiring maximum print resolution
Kit contents4 metal nozzles with an internal diameter of 150 µm (6 mil)
Attentiondo not use with T4 solder paste - risk of nozzle clogging
V-One Starter Pack
Voltera V-One Printer Consumables Kit
The V-One Starter Bundle includes everything you need to get started immediately. With fresh silver paint, fresh solder paste, flux, new nozzles, and a complete starter project, this package renews your setup with the essential consumables that come with a brand-new device. This bundle is ideal if you bought your V-One printer secondhand, work in a shared lab where some components have been lost, or are restoring your equipment to service after a long period of shelf storage.
Kit contents
Conductive inkConductor 4 – paint with silver nanoparticles, 1 pc.
Solder pasteT4 Sn42Bi57.6Ag0.4, 1 pc.
Dosing nozzles230 µm, disposable, 25 pcs/box
FR1 foundations2″×3″, 10 pcs/pack
FR1 foundations3″×4″, 6 pcs/pack
Solder wireSn42Bi57Ag1, 1 pc.
Soldering flux1 pieces.
Startup project"Hello World" component set, 1 pc.
compatibilityVoltera V-One printer
V-One dispenser
Replacement dispenser and cover for the Voltera V-One printer – precise dispensing of paint and solder paste
The V-One interchangeable dispenser and sheath are used to dispense conductive paint or solder paste onto the board. The cartridge slides into the sheath chamber, the dispenser locks into place, and the entire assembly magnetically attaches to the V-One printhead, ensuring stable and precise material dispensing during printing.
Product data
compatibilityVoltera V-One printer
Applicationdosing conductive paint and solder paste
Mountingmagnetic, on the V-One print head
Copper rivets 0,4 mm 200 pcs.
0,4mm copper rivets for creating vias connecting the top and bottom layers of a Voltera V-One printed circuit board
Rivets are small copper bushings used to create vias on PCBs. Vias create a mechanical connection between the top and bottom layers of a printed circuit board (PCB) printed on a V-One printer. Rivet installation requires a 0,40 mm riveting tool matched to the rivet size.
Product data
compatibilityVoltera V-One printer
Contents of the package200 copper rivets
Inner diameterTraces
Production countryGermany
Head diameterTraces
Recommended drill sizeTraces
Riveting tool sizeTraces
Sn42Bi57Ag1 solder wire
Solder wire for hand soldering components on V-One and NOVA boards – low melting temperature, chemically tested with Voltera paint
Sn42Bi57Ag1 solder wire is used for hand soldering components on Voltera printed circuit boards and factory-made circuit boards. Used with the appropriate amount of flux, it ensures a strong, durable solder joint. The wire's chemical composition has been tested for compatibility with Voltera conductive paint.
Product data
compatibilityVoltera V-One and NOVA printer
Alloy compositionSn42 Bi57 Ag1
DiameterTraces
Production countryUSA
Flux content2,2 %
Weight10 gr
Recommended soldering temperature180 ° C (356 ° F)
Compatibilitylead-free, RoHS compliant
