vinygloss v2
Click to enlarge
POLYGLOSS
POLYGLOSS
Back to products
MPI
MPI

VINYGLOSS V2

Solvent-based, non-CMR ink for printing on PVC, polyester, polycarbonate, acrylic plastics, paper and cardboard

VINYGLOSS V2 is a non-CMR solvent-based ink designed for printing on self-adhesive and rigid PVC, treated polyester, polycarbonate, acrylics, specialty papers, and cardboard. It can be used on manual, semi-automatic, three-quarter automatic, and automatic machines. It performs exceptionally well on PVC and is stackable immediately after exiting the tunnel. It is characterized by high opacity, self-dilution, good light resistance, and thermoformability. Note: These substrates may vary depending on source, so preliminary testing is necessary.

Specification
Ink typeSolvent-based, non-CMR
ApplicationSelf-adhesive and rigid PVC, treated polyester, polycarbonate, acrylic plastics, special papers, cardboard
Sito200–300 threads/inch (79–120 threads/cm)
EmulsionAll types are solvent resistant
SqueegeePolyurethane 65 shA or 75 shA
DryingSolvent evaporation; approx. 5–20 min at room temperature; blowing at 60°C for 10–20 s
ThinnersV2 201 (15–20%), retarder V2 203 for drying on a screen
Cleaning the sieveBiosolvent 77 BIO
Storage5 years, +5°C to +35°C, in original packaging

Substrate
Self-adhesive PVCRigid PVCTreated polyesterPolycarbonateAcrylic materialsSpecial papersCardboard boxes
See all color and material codes
Primary colors
V2102 WHITE
V2404 ORANGE
V2406 GOLDEN YELLOW
V2501 LEMON YELLOW
V2612 GREEN
V2701 PURPLE
V2719 PERMANENT BLUE
V2801 RED
V2810 CARMINE
V2811 PINK
V2902 BLACK
Mixtone Colors
V210MX WHITE
V251MX MIXTONE GOLDEN YELLOW
V240MX MIXTONE ORANGE
V281MX MIXTONE RED
V282MX MIXTONE PINK
V271MX MIXTONE PURPLE
V270MX MIXTONE BLUE
V260MX MIXTONE GREEN
V280MX MIXTONE VERMILLON
V290MX MIXTONE BLACK
Standard colors
V2433 SUPER ORANGE
V2526 MEDIUM YELLOW
V2531 YELLOW
V2638 BRILLIANT
V2722 BRILLIANT
V2727 BLUE
V2743 FRENCH BLUE
V2828 RED FIRE
V2830 LIGHT RED
Process colors
V2002 BASE TIX
V2560 YELLOW TIX RE
V2750 CYAN TIX
V2860 MAGENTA TIX R
V2950 BLACK TIX R
Highly lightfast colors
V2404LF ORANGE
V2406LF GOLDEN
V2501LF YELLOW
V2801LF RED
Transparent colors
V25600 TRANSPARENT
V26600 TRANS. GREEN
V27601 TRANS. BLUE
V28600 TRANS. RED
Opacity black / white
V2905 BLACK COVERAGE
V2103 WHITE COVERAGE
V2105 WHITE FOR WRITING
Lacquer
V2003 PRINTABLE VARNISH
Thinners and additives
V2201 THINNER
V2203 RETARDANT

Ask about the product →

Compare
Add to wishlist
Category: ,

Similar products

Compare

PLUTO V2

,

UV screen printing ink, non-CMR, for printing on many substrates (PE, PP, PVC, self-adhesive vinyl)

PLUTON V2 is a single-component, non-CMR, ready-to-use UV ink designed for printing on treated polyethylene and polypropylene (sheet or corrugated, surface tension above 41 dyne/cm), rigid and flexible PVC, and self-adhesive vinyl. It also works well on paper, cardboard, ABS, polycarbonate, polyester, PMMA, and PETG. The ink has a glossy finish and can be used on semi-automatic, semi-automatic, and automatic presses.

Specification
Ink typeUV, non-CMR, single-component
ApplicationTreated PE and PP, rigid and flexible PVC, self-adhesive vinyls
Sito140–180 threads/cm (330–450 threads/inch); for PNBILLE V2 recommended 90 threads/cm
DryingUV radiation, 60–80 mJ/cm² (opaque colors 80–100 mJ/cm²)
SqueegeePolyurethane 75 shA
ThinnersUV201 (up to 5%), LA202V2 fast thinner (1–3%)
Cleaning the sieveBiosolvent 77 BIO
Efficiencyapprox. 70–80 m²/kg (fabric 150×33)
Storage24 months, +5°C to +35°C

Substrate
Paper and cardboardPE / PP processedrigid PVCflexible PVCSelf-adhesive vinylABSPolycarbonatepolyesterPMMAPETG
See all color and material codes
Primary colors
PN102V2 WHITE
PN404V2 ORANGE
PN406V2 GOLDEN YELLOW
PN501V2 LEMON YELLOW
PN612V2 GREEN
PN701V2 PURPLE
PN719V2 BLUE PERMANENT
PN801V2 RED
PN810V2 CARMIN
PN811V2 PINK
PN902V2 BLACK
Opacity black / white
PN905V2 BLACK COVER
PN103V2 WHITE COVERAGE
Lacquer
PN003V2 clear varnish
PNBILLE V2
Thinners
UV201 Thinner
LA202V2 Quick Thinner

Ask about the product →

Add to wishlist
Quick view
Low Viscosity – SILVER ELECTRON LOW ENERGY CURING – Chemikonics
Compare

Low Viscosity – SILVER ELECTRON LOW ENERGY CURING

,

Low viscosity silver conductive paint for printed electronics

LOW VISCOSITY – SILVER ELECTRON LOW ENERGY CURING is a low-viscosity conductive silver ink designed for screen printing in printed electronics applications. Its optimized rheology enables the printing of thin, precise conductive traces while maintaining high electrical conductivity. Low-temperature curing makes it ideal for temperature-sensitive substrates such as PET films, paper, and cardboard. This product complies with non-CMR regulations and is ideal for the production of membrane switches, RFID tags, touch panels, and flexible printed electronics.

Specification
resistance≤ 12 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C15–25
Yield (cm²/g)260–340
Open time on the sieve (min)30
Substrate
Paper cartonPETPVCPolycarbonateSurface-modified polyester
Ask about the product →
Add to wishlist
Quick view
ECV003 – Chemikonics
Compare

ECV003

,

Dielectric Varnish for Printed Electronics

ECV003 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.

Specification
Breakdown voltage≥ 4000 V (2 layers)
Curing energy (mJ/cm²)> 300
Density1,13
Viscosity (poise), Rotothinner, 562 rpm, 25°C95
Paint colorGreen
Chemical compatibility with the seriesSilver Electron
Yield (cm²/g)400–440
Open time on the sieve (min)60
Substrate
Paper cartonPETPolycarbonateSurface-modified polyester
Ask about the product →
Add to wishlist
Quick view
FLEXOGRAPHY SILVER ELECTRON – Chemikonics
Compare

FLEXOGRAPHY SILVER ELECTRON

, ,

Silver Conductive Paint for Printed Electronics

FLEXOGRAPHY SILVER ELECTRON (FSE) is a solvent-based, silver-based conductive ink specifically designed for flexographic printing in printed electronics applications. It provides high electrical conductivity, stable parameters after curing, and high flexibility of printed traces. The product is intended for high-volume production of applications such as RFID tags, antennas, flexible printed circuits, and other functional electronics components. The ink is compatible with paper, PET, polycarbonate, and polyester substrates and meets the requirements of the non-CMR policy.

Specification
resistance≤ 10 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C12–18
Yield (cm²/g)300–380
Open time on the sieve (min)60
Substrate
Paper cartonPVCPETPolycarbonateSurface-modified polyesterGlassPolyimide
Ask about the product →
Add to wishlist
Quick view
ECV004 – Chemikonics
Compare

ECV004

,

Dielectric Varnish for Printed Electronics

ECV004 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.

Specification
Breakdown voltage*≥ 4000 V (2 layers)
Curing energy (mJ/cm²)> 300
Density1,13
Viscosity (poise), Rotothinner, 562 rpm, 25°C75
Paint colorColorless
Chemical compatibility with the seriesSilver Electron
Yield (cm²/g)400–440
Open time on the sieve (min)60
Substrate
Paper cartonPETPolycarbonateSurface-modified polyester
Ask about the product →
Add to wishlist
Quick view
UVREL DIGIT – Chemikonics
Compare

UVREL DIGIT

,

UV varnish with a raised effect (non-CMR) for printing on digital inks

UVREL DIGIT is a non-CMR (carcinogenic and mutagenic) embossed UV screen printing varnish designed for printing on digital inks without the need for a primer. UV-curable, it offers high flexibility and good reactivity, and is compatible with flatbed and rotary screen printing machines. It has a clear/glossy finish. Substrates may vary depending on source – preliminary testing is recommended before production.

Specification
SubstratesPaper, polyethylene and polypropylene with top coating
Sito50 to 160 threads/inch (21 to 63 threads/cm)
TemplateDY, BY, BU and EP
EmulsionAll types of solvent and UV resistant emulsions
Squeegeemin. 65 shA (profile P0 rotary / P5 flat)
DryingUV radiation (approx. 120 mJ/cm²)
Thinner and additiveReady to use, optionally up to 5% with UV201 thinner
Cleaning77 ORGANIC
Storage12 months at +5°C to +35°C
Substrate
Paper IndustryPolyethylene (PE)polypropylene (PP)
See packaging and thinners
Lacquer
UVREL DIGIT 5 KG
Thinners and additives
UV201 THINNER (1-5 KG)
RAPID THINNER LA202V2 (1-5 KG)
Ask about the product →
Add to wishlist
Quick view
UVRELR V3 – Chemikonics
Compare

UVRELR V3

,

UV varnish with a raised effect (non-CMR) for rotary and flat printing

UVRELR V3 is a non-CMR UV screen printing varnish with a raised effect, designed for raised printing on rotary and flatbed screen printing machines. It enables printing text on rotary presses at speeds up to 60 m/min. It has high flexibility and good reactivity, and offers a clear/glossy finish. Substrates may vary depending on source – preliminary testing is recommended before production.

Specification
SubstratesPaper, polyethylene and polypropylene with top coating
TemplateDY, BY, BU and EP
EmulsionAll types of solvent and UV resistant emulsions
Squeegeemin. 65 shA (profile P0 for rotary machines or P5 for flat machines)
DryingUV radiation (approx. 120 mJ/cm²)
Thinner and additivesReady to use (up to 5% with UV201 thinner)
Cleaning77 ORGANIC
Storage12 months at +5°C to +35°C
Substrate
Paper IndustryPolyethylene (PE)polypropylene (PP)
See packaging and thinners
Lacquer
UVRELR V3 5 KG
Thinners and additives
UV201 THINNER 1 KG - 5 KG
QUICK THINNER LA202V2 1 KG - 5 KG
Ask about the product →
Add to wishlist
Quick view
CARBON ELECTRON-003 – Chemikonics
Compare

CARBON ELECTRON-003

,

Resistive Carbon Paint for Printed Electronics

CARBON ELECTRON 003 (CEL003) is a next-generation solvent-based carbon ink designed for printed electronics. It provides stable and repeatable resistivity, high print quality, and good mechanical resistance. The product is used in the production of printed resistors, carbon traces, electrodes, membrane keypad contacts, as well as measuring elements and sensors. The ink was developed with demanding industrial and R&D processes in mind.

Specification
resistance≤ 120 Ω/sq/mil at 120°C (248°F)
Viscosity (poise), Rotothinner, 562 rpm, 25°C90–110
Yield (cm²/g)360–400
Open time on the sieve (min)> 30
Substrate
Paper/cardboardPETSurface-modified polyester
Ask about the product →
Add to wishlist
Quick view