SILVER ELECTRON LOW ENERGY CURING – Chemikonics
Click to enlarge
FLEXOGRAPHY SILVER ELECTRON – Chemikonics
FLEXOGRAPHY SILVER ELECTRON
Back to products
SILVER ELECTRON THIN FILM – Chemikonics
SILVER ELECTRON THIN FILM

SILVER ELECTRON LOW ENERGY CURING

Silver Conductive Ink for Printed Electronics

SILVER ELECTRON LOW ENERGY CURING (SELEC) is a solvent-based, silver-based conductive ink for printed electronics. Designed for processes requiring reduced temperatures and faster curing times, it performs well on thermally sensitive substrates such as PET, paper, foils, and TCA. The ink provides high electrical conductivity, good printability, and uniform surface coverage while maintaining non-CMR compliance.

Specification
resistance≤ 15 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C90–100
Yield (cm²/g)240–320
Open time on the sieve (min)60

Substrate
Paper cartonPVCPETSurface-modified polyester

Ask about the product →

Compare
Add to wishlist
Category: ,

Similar products

AQUACARD TF – Chemikonics
Compare

AQUACARD TF

,

Hydro UV NON CMR ink for printing on PVC cards

AQUACARD TF is a technical VFP ink and varnish designed for the production of bank cards (PVC, RPVC). Its appearance is similar to solvent ink, but without VOC restrictions – it supports industrial printing processes, accepts embossing, laminating, and offset overprinting. It is dried by water evaporation on IR bridges and then polymerized with UV radiation. Validation on the target substrate, within the applicable process window and regulatory context, is recommended before production implementation – the ink is NON-CMR, where applicable.

Specification
Ink typeHydro UV NON CMR
ApplicationBank cards (PVC, RPVC)
Efficiency30–40 m²/kg
SqueegeePolyurethane A65/A75
DryingIR + UV 100–120 mJ/cm²
Lamination125–140°C, 5–15 min
Adhesion>8 N/cm (peel)
Durability12 months
Substrate
PVCRPVC
See all color codes
Golden
AC3004TF GOLD
AC3005TF GOLD
AC3006TF GOLD
AC3007TF GREEN GOLD
AC3008TF GOLD
AC3009TF RED GOLD
AC3010TF GOLD
AC3012TF GOLD
AC3013TF GOLD
Silver
AC301TF FINE SILVER
AC302TF MEDIUM SILVER
AC303TF LARGE SILVER
AC304TF MEDIUM SILVER
AC9003TF SILVER
AC9004TF SILVER
Pearl
AC311TF FINE PEARL
AC312TF PEARL
AC1002TF PEARL
AC1003TF PEARL
AC1012TF PEARL
AC1013TF PEARL
AC9011TF PEARL
Lacquer
AC003TF VARNISH
Ask about the product →
Add to wishlist
Quick view
SOLVCARD – Chemikonics
Compare

SOLVCARD

,

NON-CMR solvent ink for printing on PVC, RPVC and PET cards

SOLVCARD is a non-CMR solvent ink designed for printing on PVC, RPVC, and PET cards. It provides good stability for metallic inks in the packaging and on screens, is non-flammable, and is not classified as hazardous for transport. It is compatible with offset printing and UVICARD TF inks, and is suitable for laminating and embossing. Available in gloss or satin finishes.

Specification
Ink typeSolvent NON-CMR
ApplicationCards (PVC, RPVC, PET)
Efficiency20–55 m²/kg (depending on the fabric)
SqueegeePolyurethane 65shA/75shA
DryingTunnel 50–60°C, 10–20 s
Lamination125–140°C, 5–15 min
Adhesion~10 N/cm (peel)
Durability12 months (24 for SC103)
Substrate
PVCRPVCPET
See all color and material codes
Golden
On Request
Silver
SC301 FINE SILVER
SC302 MEDIUM SILVER
SC303 LARGE SILVER
Pearl
SC311 PEARL FINE
SC312 PEARL MEDIUM
SC313 PEARL LARGE
Transparent
SC5601 TRANS YELLOW
SC8003 TRANS BROWN
Opaque white and black
SC103 OPAQUE WHITE
SC105 SHUTTER WHITE
SC905 OPAQUE BLACK
Lacquer
SC001V2 MIXING BASE
Thinners and additives
SC201 Thinner
SC203 retarder
Ask about the product →
Add to wishlist
Quick view
UVRELCOL V2 – Chemikonics
Compare

UVRELCOL V2

,

UV varnish with a raised effect for dyeing (non-CMR)

UVRELCOL V2 is a high-viscosity, non-commercial UV screen printing varnish designed for printing raised-effect colored varnishes on flatbed, roll-to-roll, continuous label printing machines. It enables printing raised and colored effects in a single pass, ensuring high flexibility and good reactivity. It has a glossy finish. Substrates may vary depending on source – preliminary testing is recommended before production.

Specification
SubstratesPaper, polyethylene and polypropylene with top coating
Sito80 to 200 threads/inch (31 to 79 threads/cm)
EmulsionAll types of solvent and UV resistant emulsions
Squeegee65 shA (polyurethane)
DryingUV radiation (approx. 150 mJ/cm² with a sieve of 43 threads/cm)
Thinner and additiveReady to use
Cleaning77 ORGANIC
Storage12 months at +5°C to +35°C
Substrate
Paper IndustryPolyethylene (PE)polypropylene (PP)
See packaging and thinners
Lacquer
UVRELCOL V2 1 KG
Thinners and additives
UV201 THINNER 1 KG
QUICK THINNER LA202V2 1 KG
Ask about the product →
Add to wishlist
Quick view
SILVER ELECTRON – Chemikonics
Compare

SILVER ELECTRON

,

Silver Conductive Paint for Printed Electronics

SILVER ELECTRON (SE) is a solvent-based silver-based conductive ink designed for printed electronics applications. It provides high electrical conductivity and high stability of conductive properties over time after annealing, as well as excellent flexibility. It is ideal for the production of printed conductive traces, sensors, membrane switches, RFID antennas, and flexible electronics. The product is compatible with PET, PVC, polycarbonate, surface-modified polyester, glass, polyimide, and paper/cardboard substrates and meets the requirements of the non-CMR policy.

Specification
resistance≤ 15 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C58–64
Yield (cm²/g)280–360
Open time on the sieve (min)60
Substrate
Paper cartonPVCPETPolycarbonateSurface-modified polyesterGlassPolyimide
Ask about the product →
Add to wishlist
Quick view
IR BLOCKING V2 – Chemikonics
Compare

IR BLOCKING V2

,

NON CMR infrared blocking solvent ink for transparent cards

IR BLOCKING V2 is a non-CMR solvent ink printed inside the card structure, absorbing infrared light (860–950 nm). It enables the correct reading and use of transparent payment cards in ATMs and ATM terminals, in accordance with the ISO/IEC 7810 standard. This non-flammable product, not classified as hazardous for transport, dries quickly, and is available in glossy or satin finishes.

Specification
Ink typeSolvent NON CMR
ApplicationIR blocking 860–950 nm (ATM cards)
NormaISO / IEC 7810
Net79–90 threads/cm (140 double pass)
SqueegeePolyurethane 65shA/75shA
Efficiency30–40 m²/kg
DryingTunnel 40–60°C, 40 s–1 min
Durability6 months
Substrate
PVCRPVC
Ask about the product →
Add to wishlist
Quick view
LABELMAT V2 – Chemikonics
Compare

LABELMAT V2

,

Matte UV ink (non-CMR) for top-coated paper, PE and PP labels

LABELMAT V2 is a matte, non-CMR UV screen printing ink designed for label printing on flatbed and rotary roll-to-roll presses. The ink is flexible, resistant to deformation and cutting, dries quickly, and is suitable for hot foil stamping and embossing. Matte appearance (less than 20% gloss) – do not use on matte substrates or white glassine, as their porosity creates an uneven effect. Substrates may vary depending on their origin – preliminary testing is recommended before production.

Specification
SubstratesPaper, polyethylene and polypropylene with top coating
Sito355 to 420 threads/inch (140 to 165 threads/cm)
EmulsionAll types of solvent and UV resistant emulsions
Squeegee75 shA
DryingUV radiation (approx. 60 to 100 mJ/cm², depending on the screen and color)
Thinner and additivesReady to use (up to 5% with UV201 thinner)
Cleaning77 ORGANIC
Storage12 months at +5°C to +35°C
Substrate
Paper IndustryPolyethylene (PE)polypropylene (PP)
See packaging and thinners
Black / White
LM905V2 COVER BLACK 5 KG
LM102V2 WHITE 1 KG - 5 KG
LM103V2 COVERAGE WHITE 5 KG
Basic colors available on request
Lacquer
VARNISH LM003V2 5 KG
Thinners and additives
UV201 THINNER 1 KG - 5 KG
QUICK THINNER LA202V2 1 KG - 5 KG
Ask about the product →
Add to wishlist
Quick view
UVICARD TF – Chemikonics
Compare

UVICARD TF

,

UV NON CMR ink for screen printing on PVC and RPVC cards

UVICARD TF is a non-carcinogenic and mutagenic UV screen printing ink designed for printing on PVC and RPVC cards. UV-curable, it dries quickly, and is compatible with offset printing for lamination and embossing. It has a glossy finish. Validation on the target substrate and within the applicable processing window is recommended before production implementation.

Specification
SubstratesPVC, RPVC
Net160 to 355 threads/inch (63 to 140 threads/cm)
EmulsionAll types of solvent and UV resistant emulsions
Squeegee75 shA
DryingUV curing
Thinner and additiveUV201 Thinner
Cleaning77 ORGANIC
Storage12 months at +5°C to +35°C
Substrate
PVCRPVC
See all color codes
Gold metallic
CC3001TF GOLD
CC3014TF GOLD
CC3600TF GOLD
CC3601TF YELLOW GOLD
CC3602TF GREEN GOLD
CC3603TF RED GOLD
Silver metallic
CC302TF MEDIUM SILVER
CC303TF LARGE SILVER
CC9009TF FINE SILVER
Pearl
CC311TF PEARL FINE
CC312TF PEARL MEDIUM
CC313TF PEARL LARGE
Primary colors
CC102TF WHITE
CC404TF ORANGE
CC406TF GOLDEN YELLOW
CC501TF LEMON YELLOW
CC612TF GREEN
CC701TF VIOLET
CC719TF BLUE
CC801TF RED
CC810TF CARMINE
CC811TF PINK
CC902TF BLACK
Transparent colors
CC5601TF TRANS YELLOW
CC7602TF TRANS BLUE
CC8003TF TRANS BROWN
CC8602TF TRANS RED
Opaque black
CC905TF OPAQUE BLACK
Varnishes
CC0003TF PEARL VARNISH
CC001TF CLEAR BASE
Thinners and additives
UV201 THINNER
Primers and adhesives
UVPLATF PRIMER*
CC0006TF PVC BACKING*
CC0007TF PVC/PVC GLUE*
CC0008TF PET FOUNDATION*

Ask about the product →

Add to wishlist
Quick view
SILVER ELECTRON STRETCHABLE – Chemikonics
Compare

SILVER ELECTRON STRETCHABLE

,

Silver Paint for Printed Electronics

SILVER ELECTRON STRETCHABLE (SES) is a solvent-based, silver-based conductive ink designed for applications requiring high flexibility and stretchability. The product was developed for wearable electronics, intelligent textiles, and thermoformed components (IME/IMD). After appropriate curing, the ink provides high electrical conductivity, heat resistance, excellent substrate adhesion, and high print resolution. It can be used on PET, polycarbonate, and polyurethane substrates and is compatible with thermoforming processes. The formulation is CMR-free (non-CMR).

Specification
resistance< 15 mΩ/sq/mil (3,8×10⁻⁷ Ω m)
Viscosity (poise), Rotothinner, 562 rpm, 25°C25
Yield (cm²/g)290–370
Open time on the sieve (min)> 60
Substrate
Paper cartonPVCPolyurethanePETPolycarbonateSurface-modified polyesterPolyimide
Ask about the product →
Add to wishlist
Quick view