NEOBLACK SC1B – Chemikonics
Click to enlarge
NEOBLACK SP2 – Chemikonics
NEOBLACK SP2
Back to products
NEOBLACK SC2B – Chemikonics
NEOBLACK SC2B

NEOBLACK SC1B

Conductive graphene-based ink

NEOBLACK SC1B is a water-based, conductive, graphene-based spray paint designed for heating and EMI shielding applications. Solvent-free and single-component (ready-to-use), it is based on multilayer graphene (FLG), compatible with a wide range of substrates, and easy to clean after use. Thermal cure: 120–150°C for 3–5 minutes (or 4–5 minutes with an IR lamp).

Specification
Resistivity (normalized)35 Ω/sq/mil
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)0,135
Solids content (%)4,6
Durability12 months

Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI

Ask about the product →

Compare
Add to wishlist
Category: ,

Similar products

NEOBLACK SC3B – Chemikonics
Compare

NEOBLACK SC3B

,

Conductive graphene-based spray paint

NEOBLACK SC3B is a water-based, conductive, graphene-based spray paint designed for heating and EMI shielding applications. Solvent-free and single-component (ready-to-use), it's based on multilayer graphene (FLG), compatible with a wide range of substrates, and easy to clean after use. Thermal cure: 120–150°C for 3–5 minutes (or 4–5 minutes with an IR lamp).

Specification
Resistivity (normalized)105 Ω/sq/mil
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)0,213
Solids content (%)8,57
Durability12 months
Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI
Ask about the product →
Add to wishlist
Quick view
NEOBLACK SC2B – Chemikonics
Compare

NEOBLACK SC2B

,

Conductive graphene-based spray paint

NEOBLACK SC2B is a water-based, conductive, graphene-based spray paint designed for heating and EMI shielding applications. Solvent-free and single-component (ready-to-use), it's based on multilayer graphene (FLG), compatible with a wide range of substrates, and easy to clean after use. Thermal cure: 120–150°C for 3–5 minutes (or 4–5 minutes with an IR lamp).

Specification
Resistivity (normalized)55 Ω/sq/mil
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)0,191
Solids content (%)6,47
Durability12 months
Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI
Ask about the product →
Add to wishlist
Quick view
BLACKHEATER GPAD 10+ – Chemikonics
Compare

BLACKHEATER GPAD 10+

,

Flexible graphene heating film for low-voltage applications

The BLACKHEATER GPAD 10+ is a thin and flexible graphene heating film printed on a PET substrate. Designed for low-voltage heating applications powered by a mobile power bank (5 V DC, 8 W, USB-C), it ensures uniform heat distribution with a total thickness of 400 µm and a minimum bend radius of 2 mm. For proper operation, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the heater's resistance.

Specification
Standard format150 × 100 mm
Supply voltage5V DC (USB-C)
Nominal power8 W
Nominal current1,8 A at 5 V
Electrical resistance of the heater2,8 Ω
Total thickness400 um
Weight of one plate16 gr
Ambient operating temperature-40 ° C to + 120 ° C
Max. surface temperature (reference conditions, 8 W)approx. 58°C
Applications
Integration with wearablesPersonal comfortHeating terrariums and reptilesHeating small animalsOEM Integration and DIY Systems
Ask about the product →
Add to wishlist
Quick view
NEOBLACK SP2 – Chemikonics
Compare

NEOBLACK SP2

,

Conductive graphene-based ink for screen printing

NEOBLACK SP2 is a water-based, conductive, graphene-based screen printing ink designed to create highly conductive, flexible, and uniform patterns for heating, printed electronics, sensor technology, and EMI shielding applications. Solvent-free and single-component (ready-to-use), it features high flexibility, compatibility with a wide range of substrates, and easy cleanup with distilled water after use. The resistive behavior remains stable (STC) up to 150°C; above this temperature, the ink exhibits a negative temperature coefficient (NTC). Thermal curing: 120–150°C for 3–5 min (or tunnel oven in a 100→130→130°C profile, approximately 1,5 min total).

Specification
Resistivity (2 layers, 35 µm)40 Ω/sq (55 Ω/sq/mil)
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)25
Coverage (cm²/g)78,25
Resistive Stability (STC)to 150 ° C
Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI
Ask about the product →
Add to wishlist
Quick view
BLACKHEATER GPAD 30+ – Chemikonics
Compare

BLACKHEATER GPAD 30+

,

Flexible graphene-based heating foil for low-voltage applications

The BLACKHEATER GPAD 30+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Designed for lightweight, low-power thermal management applications (12 V DC, 4 W), it provides uniform heat distribution with a total thickness of 185 µm and a minimum bend radius of 2 mm. For proper operation, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on heater resistance measurement.

Specification
Standard format100 × 100 mm
Supply voltage12 V DC
Nominal power4 W
Nominal current0,33 A at 12 V
Electrical resistance of the heater36 Ω
Total thickness185 um
Weight of one plate2,13 gr
Ambient operating temperature-40 ° C to + 100 ° C
Max. surface temperature (reference conditions, 4 W)approx. 60°C
Applications
Thermal management of batteries and electronicsHeating of electrical and electronic cabinetsCondensation protectionLocal temperature maintenance (low voltage)
Ask about the product →
Add to wishlist
Quick view
BLACKHEATER GPAD 11+ – Chemikonics
Compare

BLACKHEATER GPAD 11+

,

Flexible graphene-based heating foil with a clamp connection

The BLACKHEATER GPAD 11+ is a thin and flexible graphene-based heating film printed on a PET substrate without an integrated adhesive layer. Designed for low-voltage heating applications (5 V DC, 8 W), it ensures uniform heat distribution with a total thickness of 400 µm and a minimum bend radius of 2 mm. Connection via terminal connectors requires a 5 V DC power supply with a minimum capacity of 1,8 A and an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the resistance of the heating film.

Specification
Standard format150 × 100 mm
Supply voltage5 V DC
Nominal power8 W
Nominal current1,8 A at 5 V
Electrical resistance of the heating foil2,8 Ω
Total thickness400 um
Weight of one panel16 gr
Ambient operating temperature-40 ° C to + 120 ° C
Max. surface temperature (reference conditions, 8 W)approx. 58°C
Applications
Integration with wearablesPersonal comfortHeating terrariums and reptilesHeating small animalsOEM Integration and DIY Systems
Ask about the product →
Add to wishlist
Quick view
BLACKHEATER GPAD 20+ – Chemikonics
Compare

BLACKHEATER GPAD 20+

,

Flexible graphene-based heating foil for drones

The BLACKHEATER GPAD 20+ is a self-adhesive, thin, and flexible graphene-based heating film printed on a PET substrate. Originally designed for drone applications, the BLACKHEATER GPAD 20+ operates at 12V DC (20W) and provides uniform heat distribution with a total thickness of 295µm and a minimum bend radius of 2mm. To function correctly, it requires integration with an external temperature control system (sensor and ON/OFF or PID controller). Regulation cannot be based on measuring the heater's resistance.

Specification
Standard format500 × 50 mm
Supply voltage12 V DC
Nominal power20 W
Nominal current1,6 A at 12 V
Electrical resistance of the heater7,5 Ω
Total thickness295 um
Weight of one plate15 gr
Ambient operating temperature-40 ° C to + 120 ° C
Max. surface temperature (reference conditions, 20 W)approx. 95°C
Applications
De-icing and defrosting the leading edge of dronesThermal management of batteries and on-board electronicsThermal Signature Check (Thermal Decoy)OEM Integration and DIY Systems
Ask about the product →
Add to wishlist
Quick view
NEOBLACK SP1 – Chemikonics
Compare

NEOBLACK SP1

,

Conductive graphene-based ink for screen printing

NEOBLACK SP1 is a water-based, conductive graphene-based screen printing ink designed to create thin, flexible, and uniform conductive patterns in heating applications and printed electronics. Solvent-free and single-component (ready-to-use), it features high flexibility, compatibility with a wide range of substrates, and easy cleanup after use with distilled water. The resistive behavior remains stable (STC) up to 150°C; above this temperature, the ink exhibits a negative temperature coefficient (NTC). Thermal curing: 120–150°C for 3–5 min (or tunnel oven in a 100→130→130°C profile, approximately 1,5 min total).

Specification
Resistivity (2 layers, 35 µm)20 Ω/sq (14 Ω/sq/mil)
Viscosity (Pa s, rheometer, 20°C, 10 s⁻¹)15
Coverage (cm²/g)78,25
Resistive Stability (STC)to 150 ° C
Substrate
Paper IndustryPETModified polyesterfabricsKapton® (polyimide)TPUPEI
Ask about the product →
Add to wishlist
Quick view