Conductor 4
4th generation conductive ink for Voltera V-One printer – high silver content, excellent solderability and short curing time
Conductor 4 is Voltera's latest, fourth-generation silver conductive ink. It contains 80% silver by weight (nanoparticles approximately 80 nm) and is designed for printing conductive traces and pads on PCBs (FR1, FR4 laminates) using the V-One printer. It provides excellent water and alcohol resistance and very good solderability – it accepts soldering with tin-bismuth-silver wire with flux at 180°C. Thermal cure: 10 minutes at 175°C. 2 mL cartridge, made in the USA – requires refrigerated storage, shelf life up to 12 months from the date of production.
Product data
compatibilityVoltera V-One printer
Silver content80% by weight (silver nanoparticles approx. 80 nm)
Applicationprinting of conductive PCB paths and pads (FR1, FR4 laminates)
Package2 ml cartridge
Hardening175°C for 10 minutes
Solderingtin-bismuth-silver (Sn-Bi-Ag) soldering wire with flux, temperature 180°C
Resistancevery good resistance to water and alcohol
Storagein cold storage, shelf life up to 12 months from the date of production
Production countryUSA
Category: Voltera, Conductive inks and materials
Description
Similar products
100 µm nozzles – 4 pcs.
Metal dispensing nozzles 100 µm – 4 pcs in a set, for very low viscosity materials
100µm nozzles are high-precision metal dispensing tips designed for dispensing very low-viscosity materials. The kit includes four 100µm (4 mil) internal diameter nozzles, manufactured in the USA by Subrex. Do not use with Cond3 ink or T5 solder paste – this will cause nozzle clogging and reduced print quality.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationdosing of very low viscosity materials
Kit contents4 metal nozzles with an internal diameter of 100 µm (4 mil)
Attentiondo not use with Cond3 ink or T5 solder paste - risk of nozzle clogging
Voltera NOVA
Direct Ink Write (DIW) Platform for Printed Electronics and Functional Materials
Voltera NOVA is a modular Direct Ink Write (DIW) platform that enables precise dispensing of functional materials—solder pastes, conductive paints, dielectrics, and other functional materials—and rapid prototyping of printed electronics. The system works on rigid (PCBs, glass, ceramics), flexible (PI, PET), stretchable (TPU), and porous (paper, fabric) substrates, accelerating R&D by up to 90% and reducing material costs by up to 96% (according to the manufacturer). Chemikonics supplies the device along with consumables and technical support in the Polish market.
Specification
TechnologyDirect Ink Write (DIW)
Minimum track width0,1 mm *
Workspace (print)220 300 mm × mm × mm 40
Number of layersup to 4 layers (stack-up)
XYZ resolution2,5 µm × 7 µm × 1,25 µm
Pressure controlclosed loop
Material temperature controlto 40 ° C
Compatible modulesSmart Dispenser, Smart Probe, Vacuum Table
Fixing the substrateraised clamps, vacuum table, M5 mesh (40×40 mm)
Substrate thicknessup to 30 mm
Syringe capacityup to 2,5 ml
File formatGerber, SVG (beta)
Dosed materialssolder pastes, conductive paints, dielectrics and other functional materials
Material viscosity1,000–1,000,000 cP
Number of module slots2
interfaceweb application (browser)
CommunicationEthernet, USB-A, Wi-Fi (with adapter)
Substrate
PCB / glass / ceramicsFlexible films (PI, PET)Stretchable materials (TPU)Porous substrates (paper, fabrics)
Perfect for
R&D departmentsUniversity laboratoriesFlexible electronics manufacturersMaterials startups / deep-techResearch centers
Applications
Electrodes/sensors (ECG)Printed batteriesRFID / antennasIntelligent textilesEL circuits
More about the product →
Ask about the product →ECV003
Dielectric Varnish for Printed Electronics
ECV003 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.
Specification
Breakdown voltage≥ 4000 V (2 layers)
Curing energy (mJ/cm²)> 300
Density1,13
Viscosity (poise), Rotothinner, 562 rpm, 25°C95
Paint colorGreen
Chemical compatibility with the seriesSilver Electron
Yield (cm²/g)400–440
Open time on the sieve (min)60
Substrate
Paper cartonPETPolycarbonateSurface-modified polyester
Ask about the product →Copper rivets 1,0 mm 200 pcs.
1,0mm copper rivets for creating vias connecting the top and bottom layers of a Voltera V-One printed circuit board
Rivets are small copper bushings used to create vias on PCBs. Vias create a mechanical connection between the top and bottom layers of a printed circuit board (PCB) printed on a V-One printer. Rivet installation requires a 1,00 mm riveting tool matched to the rivet size.
Product data
compatibilityVoltera V-One printer
Contents of the package200 copper rivets
Inner diameterTraces
Production countryGermany
Head diameterTraces
Recommended drill size1,50mm or 1,60mm
Riveting tool sizeTraces
V-One Starter Pack
Voltera V-One Printer Consumables Kit
The V-One Starter Bundle includes everything you need to get started immediately. With fresh silver paint, fresh solder paste, flux, new nozzles, and a complete starter project, this package renews your setup with the essential consumables that come with a brand-new device. This bundle is ideal if you bought your V-One printer secondhand, work in a shared lab where some components have been lost, or are restoring your equipment to service after a long period of shelf storage.
Kit contents
Conductive inkConductor 4 – paint with silver nanoparticles, 1 pc.
Solder pasteT4 Sn42Bi57.6Ag0.4, 1 pc.
Dosing nozzles230 µm, disposable, 25 pcs/box
FR1 foundations2″×3″, 10 pcs/pack
FR1 foundations3″×4″, 6 pcs/pack
Solder wireSn42Bi57Ag1, 1 pc.
Soldering flux1 pieces.
Startup project"Hello World" component set, 1 pc.
compatibilityVoltera V-One printer
ECV004
Dielectric Varnish for Printed Electronics
ECV004 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.
Specification
Breakdown voltage*≥ 4000 V (2 layers)
Curing energy (mJ/cm²)> 300
Density1,13
Viscosity (poise), Rotothinner, 562 rpm, 25°C75
Paint colorColorless
Chemical compatibility with the seriesSilver Electron
Yield (cm²/g)400–440
Open time on the sieve (min)60
Substrate
Paper cartonPETPolycarbonateSurface-modified polyester
Ask about the product →SILVER ELECTRON
Silver Conductive Paint for Printed Electronics
SILVER ELECTRON (SE) is a solvent-based silver-based conductive ink designed for printed electronics applications. It provides high electrical conductivity and high stability of conductive properties over time after annealing, as well as excellent flexibility. It is ideal for the production of printed conductive traces, sensors, membrane switches, RFID antennas, and flexible electronics. The product is compatible with PET, PVC, polycarbonate, surface-modified polyester, glass, polyimide, and paper/cardboard substrates and meets the requirements of the non-CMR policy.
Specification
resistance≤ 15 mΩ/sq/mil
Viscosity (poise), Rotothinner, 562 rpm, 25°C58–64
Yield (cm²/g)280–360
Open time on the sieve (min)60
Substrate
Paper cartonPVCPETPolycarbonateSurface-modified polyesterGlassPolyimide
Ask about the product →PIEZO ELECTRON SOLVENT
Piezoelectric Paint for Printed Electronics
PIEZO ELECTRON SOLVENT (PESOL) is a solvent-based piezoelectric ink designed for printed electronics applications. It enables the creation of active layers that respond to pressure, strain, and vibration by generating an electrical signal. The product is used in piezoelectric sensors, haptic elements, energy harvesting systems, structural monitoring, and flexible electronics. The non-CMR formulation ensures safer use and high compatibility with screen printing processes.
Specification
Piezoelectric coefficient8 pC/N. The material is an electrical insulator.
Viscosity (poise), Rotothinner, 562 rpm, 25°C88 5 ±
Yield (cm²/g)250–300
Open time on the sieve (min)60
Substrate
PETSurface-modified polyester
Ask about the product →



