Conductor 4
4th generation conductive ink for Voltera V-One printer – high silver content, excellent solderability and short curing time
Conductor 4 is Voltera's latest, fourth-generation silver conductive ink. It contains 80% silver by weight (nanoparticles approximately 80 nm) and is designed for printing conductive traces and pads on PCBs (FR1, FR4 laminates) using the V-One printer. It provides excellent water and alcohol resistance and very good solderability – it accepts soldering with tin-bismuth-silver wire with flux at 180°C. Thermal cure: 10 minutes at 175°C. 2 mL cartridge, made in the USA – requires refrigerated storage, shelf life up to 12 months from the date of production.
Product data
compatibilityVoltera V-One printer
Silver content80% by weight (silver nanoparticles approx. 80 nm)
Applicationprinting of conductive PCB paths and pads (FR1, FR4 laminates)
Package2 ml cartridge
Hardening175°C for 10 minutes
Solderingtin-bismuth-silver (Sn-Bi-Ag) soldering wire with flux, temperature 180°C
Resistancevery good resistance to water and alcohol
Storagein cold storage, shelf life up to 12 months from the date of production
Production countryUSA
Category: Voltera, Conductive inks and materials
Description
Similar products
CARBON ELECTRON-001
Resistive Carbon Paint for Printed Electronics
CARBON ELECTRON 001 (CEL001) is a solvent-based carbon ink designed for printed electronics applications. The product provides good electrical conductivity, high-quality screen printing, and uniform coverage even on large surfaces. It is compatible with PET and paper substrates, and its non-CMR formulation provides a safer solution for modern production processes. The ink is used on printed resistors, carbon traces, sensor electrodes, and membrane keypad contacts.
Specification
resistance≤ 120 Ω/sq/mil at 120°C (248°F)
Viscosity (poise), Rotothinner, 562 rpm, 25°C85–105
Yield (cm²/g)360–400
Open time on the sieve (min)> 30
Substrate
Paper/cardboardPETSurface-modified polyester
Ask about the product →Sn42Bi57Ag1 solder wire
Solder wire for hand soldering components on V-One and NOVA boards – low melting temperature, chemically tested with Voltera paint
Sn42Bi57Ag1 solder wire is used for hand soldering components on Voltera printed circuit boards and factory-made circuit boards. Used with the appropriate amount of flux, it ensures a strong, durable solder joint. The wire's chemical composition has been tested for compatibility with Voltera conductive paint.
Product data
compatibilityVoltera V-One and NOVA printer
Alloy compositionSn42 Bi57 Ag1
DiameterTraces
Production countryUSA
Flux content2,2 %
Weight10 gr
Recommended soldering temperature180 ° C (356 ° F)
Compatibilitylead-free, RoHS compliant
CARBON ELECTRON-003
Resistive Carbon Paint for Printed Electronics
CARBON ELECTRON 003 (CEL003) is a next-generation solvent-based carbon ink designed for printed electronics. It provides stable and repeatable resistivity, high print quality, and good mechanical resistance. The product is used in the production of printed resistors, carbon traces, electrodes, membrane keypad contacts, as well as measuring elements and sensors. The ink was developed with demanding industrial and R&D processes in mind.
Specification
resistance≤ 120 Ω/sq/mil at 120°C (248°F)
Viscosity (poise), Rotothinner, 562 rpm, 25°C90–110
Yield (cm²/g)360–400
Open time on the sieve (min)> 30
Substrate
Paper/cardboardPETSurface-modified polyester
Ask about the product →ECV004
Dielectric Varnish for Printed Electronics
ECV004 is a UV dielectric varnish designed for printed electronics, used to isolate conductive layers and create conductive bridges (cross-overs) in multi-layer systems. It provides excellent electrical insulation (dielectric strength ≥ 4000 V in two layers) and increased UV resistance during the curing process. The product is chemically compatible with Silver Electron inks and can be used on PET, polycarbonate, surface-modified polyester, and paper/cardboard substrates. The formulation meets the requirements of the non-CMR policy.
Specification
Breakdown voltage*≥ 4000 V (2 layers)
Curing energy (mJ/cm²)> 300
Density1,13
Viscosity (poise), Rotothinner, 562 rpm, 25°C75
Paint colorColorless
Chemical compatibility with the seriesSilver Electron
Yield (cm²/g)400–440
Open time on the sieve (min)60
Substrate
Paper cartonPETPolycarbonateSurface-modified polyester
Ask about the product →Copper rivets 0,4 mm 200 pcs.
0,4mm copper rivets for creating vias connecting the top and bottom layers of a Voltera V-One printed circuit board
Rivets are small copper bushings used to create vias on PCBs. Vias create a mechanical connection between the top and bottom layers of a printed circuit board (PCB) printed on a V-One printer. Rivet installation requires a 0,40 mm riveting tool matched to the rivet size.
Product data
compatibilityVoltera V-One printer
Contents of the package200 copper rivets
Inner diameterTraces
Production countryGermany
Head diameterTraces
Recommended drill sizeTraces
Riveting tool sizeTraces
V-One Drilling Module
Attachment for drilling throughs and holes in double-sided boards – automatic and quiet operation
The V-One drilling module allows you to create vias and clearance holes in double-sided boards, which are then riveted together. The attachment attaches to the V-One head like a probe or dispenser, but is externally powered – the entire operation is automatic and surprisingly quiet.
Product data
compatibilityVoltera V-One printer
Applicationdrilling vias and transition holes in double-sided boards
Powerexternal, 12V power supply (6 ft cable)
IncludedPCB drills, 0,4/1,0 mm rivets, riveting tools, FR1 substrates, safety glasses, Punk Console kit
V-One dispenser
Replacement dispenser and cover for the Voltera V-One printer – precise dispensing of paint and solder paste
The V-One interchangeable dispenser and sheath are used to dispense conductive paint or solder paste onto the board. The cartridge slides into the sheath chamber, the dispenser locks into place, and the entire assembly magnetically attaches to the V-One printhead, ensuring stable and precise material dispensing during printing.
Product data
compatibilityVoltera V-One printer
Applicationdosing conductive paint and solder paste
Mountingmagnetic, on the V-One print head
150 µm nozzles – 4 pcs.
150 µm Metal Dispensing Nozzles – 4 pcs in a set, for precision V-One and NOVA projects
150µm nozzles are high-precision metal dispensing tips that allow you to utilize the maximum resolution of your V-One and NOVA printers in your experimental projects. This kit includes four 150µm (6 mil) inner diameter nozzles, manufactured in the USA by Subrex. Do not use with T4 solder paste – this will cause nozzle clogging and reduced print quality.
Product data
compatibilityVoltera V-One and NOVA printer
Applicationprecise designs requiring maximum print resolution
Kit contents4 metal nozzles with an internal diameter of 150 µm (6 mil)
Attentiondo not use with T4 solder paste - risk of nozzle clogging



